No overselling, no guesswork — just a Furnace Repair crew that diagnoses it right the first time. Priority scheduling available across Wilmette and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC didn't start as a franchise chasing volume. We invest in ongoing training so our techs recognize a failing capacitor, a cracked heat exchanger, or a refrigerant leak before it turns into an emergency.
We're not interested in being the cheapest quote on the page — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. Licensing and insurance aren't optional line items for us, and we keep that documentation available on request for every job, big or small.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes the maintenance schedules we recommend — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Wilmette and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. We track arrival windows, callback rates, and repeat-issue complaints internally so problems get caught before they become patterns, because a customer who trusts us once tends to call us again — and Wilmette is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Wilmette rooftop unit. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
We cover the full range of heating, cooling, and air quality work Wilmette properties actually need.
When your Furnace Repair system fails without warning, waiting days for an appointment isn't an option. Our Wilmette dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
Once a technician is on-site, the goal is always a same-visit repair — most emergency calls in Wilmette get resolved in a single trip, not a multi-day back-and-forth.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Wilmette homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Most installs in Wilmette are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services rooftop units and package systems across Wilmette, with after-hours work to avoid disrupting business.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle humidifier, dehumidifier, and air purifier installation for Wilmette households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
This is the standard every Wilmette technician on our team is held to.
Details vary by job type and are always shared upfront, never buried in fine print.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
Our office follows up after major repairs and installs to confirm everything is holding.
A little attention to how your system is running can save you a lot of money and discomfort.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
Weak airflow from the vents often traces back to a clogged filter, a failing blower motor, or leaking ductwork.
A tune-up often identifies exactly what's driving the extra energy use.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
No inflated "emergency surcharge" games — the number we quote is the number you pay.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
We don't consider a job finished until the system is actually performing correctly.
Our techs recognize brand-specific quirks instead of learning your system on the job.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
A snapshot of the feedback that keeps us accountable.
"I called three other companies first and this was the only one that actually picked up. No pressure to buy a whole new system when a repair was all we needed."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. Techs are always polite, always on time, and clean up after themselves."
"Had a full system replacement done and it was the smoothest home project I've had in years. Followed up a week later just to check everything was still running fine."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Kept our kitchen running through the weekend rush."
"Got quotes from four different companies for a replacement and this was the only one that actually walked me through the load calculation. Installation crew was in and out in a day and left the space cleaner than they found it."
"Diagnosed a failed capacitor and had it swapped within the hour. Genuinely relieved to have found a crew that answers when it matters."
None of these are unusual or embarrassing — they're just the normal wear and tear that comes with running a system through Wilmette's seasonal swings.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Clearing debris, leaves, and overgrown landscaping away from an outdoor condenser unit gives it room to breathe and keeps it running efficiently. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Wilmette area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Yes — every job gets a clear quote before any repair work begins, so there are no surprise line items on the invoice.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
We maintain current credentials because it protects both our customers and our team.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Ask your technician about current plan pricing during any service call.
If you're unsure whether your address falls in our service area, a quick call to +1-866-805-8548 will confirm it.
Property managers and business owners can request a dedicated point of contact for ongoing service.
Our technicians are trained across the major residential and commercial equipment lines, not limited to a single manufacturer.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
Ask about current after-hours rates when you call +1-866-805-8548.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
Housing stock varies a lot across Wilmette — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
Larger properties get the same upfront pricing and licensed technicians as a single-family service call, just coordinated at scale.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Wilmette installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Wilmette and the neighboring communities, keeping response times tight because our trucks stay close to home.
Property managers with multiple Wilmette addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
